OPTI-iM412-B
4 Wings Roof Attic Vent with Insulated Base and Square Boot Flashing for Single-ply Roof (TPO or PVC)
The OPTI-iM112-B attic vent is designed for single-ply roofs and comes with a TPO or PVC boot flashing (see manufacturesr below) to weld to the roof for better waterproofing.The fin design and openings of the vent allow for optimal ventilation of the attic. The inside of the base is insulated, which prevents the risk of condensation. The ventilation power of this vent depends on several factors, including space in the attic and soffits being present or not. Under ideal conditions this vent has the capacity to ventilate from 100 to 350 sq. ft. It is always recommended to place a retention tray on the insulation under the vent.
Do you want to buy this product?
Documentation
Vent advantages
- CSA certified vent
- Optimizes and evenly regulates attic ventilation
- Facilitates evacuation of heat and condensation
- Helps preserving the integrity of attic materials
- Screws included
- Anti-gust deflector
- No maintenance and noise-free
Boot flashing advantages
- Uniform and simplified installation
- Increased efficiency
- Aesthetic finish
- Minimizes error possibilities
Uniform and simplified installation
The boot flashing, made as a singular piede and ready to be installed, allows for better management of materials and a great reduction of installation time.
TPO Square Boot Flashing
Manufacturers: IKO, Elevate, Lexcan, Carlisle, GAF, Johns Mainville
Dimensions: adapted to the chosen vent base dimensions
Available colours: white, grey, tan
PVC Square Boot Flashing
Manufacturers: Sarnafil, Mule Hide, Lexcan, Protan, Sentinel
Dimensions: adapted to the chosen vent base dimensions
Available colours: white, grey, tan
Ventilation is required by the Canadian Building Code. So a Good ventilation means keeping the attic space near the outside temperature to avoid excessive contrasts. With the help of soffits, for example In summer, the chimney effect created by the Optimum ventilator eliminates excess heat from the attic and thus helps maintain the integrity of the asphalt shingles. In winter, you will get a drier attic. So no matter what the season, Optimum Ventilators will help to optimize the comfort of your home!
Characteristic
The vent is manufactured from galvanized steel followed by a specialized baked paint finish.
Custom Model
This product is available by special order only. Please specify the wanted size and colour of the vent, as well as the manufacturer and colour of the boot flashing.
Custom models are also available as special orders. We can manufacture any other size on request (vent as well as boot flashing).
Options
This model is available with or without a filter.
For a ventilator with a filter, we recommend installing a water collection tray (OPTI-PAN).
Important Note:
It is mandatory to use an Opti-Pan containment tray for the installation of all ventilators installed using the passive method, without air intake from the wall or soffit, at all times.
Colours
Standard colours available for the vent: brown, grey, black and white. Other colours available on special order (additional fee).
Available colours for the boot flashing: white, grey and tan
In compliance with CSA
The National Building Code requires adequate ventilation of the roof as per the minimum standard of Section 9.19.1 or according to the ACNOR CAN3-A93-M82.
Nos ventilateurs Optimum ont une garantie limitée à vie contre toute défectuosité de fabrication pouvant affecter la qualité du fonctionnement. Nous pouvons offrir cette tranquillité d’esprit à tous nos clients parce que tous nos produits sont approuvés CSA. En ce qui concerne nos modèles non standards et ou fait sur mesure, les mêmes critères de qualité de fabrication sont appliqués. Ce qui veut dire que durant le temps où le propriétaire de la maison qui a installé ou fait installer le ventilateur Optimum demeure à l’adresse de l’installation, Ventilation Optimum s’engage à remettre en état de fonctionnement ou à remplacer celui-ci gratuitement pour les cinq premières années et par la suite, au prorata des années d’utilisation, contre toute défectuosité. Dans un tel cas, les frais de transport et d’installation seront à la charge du client ainsi que toutes réparations domiciliaires. La garantie s’applique dans tous les cas où le ventilateur Optimum aura été installé selon nos recommandations et aura été exempt de tous mauvais traitements, usages ou toutes autres circonstances hors du contrôle de Ventilation Optimum incluant l’air salin.
Garantie concernant la peinture : Le ventilateur d’entretoit Optimum est fait d’acier galvanisé de calibre 24 et 26 et recouvert d’une peinture en poudre ou liquide cuite à base de polyester. Ventilation Optimum est fière de vous offrir une garantie de 5 ans contre la corrosion. Durant cette période, Ventilation Optimum, s’engage à remplacer le produit au comptoir sur présentation de la preuve d’achat originale.
Conditions : La responsabilité de Ventilation Optimum est limitée uniquement au remplacement des pièces en atelier. Tous les frais reliés au temps, déplacements ainsi qu’aux réparations domiciliaires ne sont pas couverts par cette garantie. La corrosion qui ne résulte pas d’un défaut de matériau ou de fabrication n’est pas couverte par cette garantie. Les circonstances hors du contrôle de Ventilation Optimum comme : la corrosion causée par des retombées industrielles, des pluies acides, accidents, dommages, négligence, la modification du produit ainsi que celle résultant d’une mauvaise installation abîmant l’acier, d’une peinture égratignée par la manutention, l’installation ou la négligence, par un environnement acide tels les fermes de porcs etc…sont exclus de cette garantie.
This warranty also excludes damage caused by:
– Infiltration of water due to an improper installation that does not comply with the recommendations and instructions of the manufacturer;
– The infiltration of water and / or condensation due to a building deficiency at the level of the national building code;
– Failure of roof drainage;
– The accumulation of snow covering the vent;
– Any domestic paint applications or inappropriate cleaning solutions;
– Bad weather and natural disasters;
– Transportation, handling or storage.
Tightness of the roof or parts installed by the contractor are not guaranteed as they are out of the control of the manufacturer. It is the roofer’s responsibility to ensure that the base is properly waterproofed using the proper roofing products. The Association of Master Roofers (AMCQ) recommends using the following technique: Metal flanges: The metal flanges of all projections must be coated with a primer embedded in plastic roofing cement, covered with a fold of cotton saturated with asphalt or canvas, followed by a fold of 15-pound felt and another fold of cotton saturated with asphalt or canvas embedded in a bitumen. In addition, having no precise notion of the composition of the building such as the tightness of the vapor barrier, the insulation or the exact amount of air inlets; these elements do not allow us to give a guarantee on the final result. Proof of purchase showing the date, your name and the shipping address will be essential in order to make any warranty claim.